LS26 surface mount schottky rectifier reverse voltage 60v forward current 2a features ? schottky barrier diodes ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1 , per j-std-020 ? solder dip 260 c, 10 s ? low profile typical thickness 1.0mm ? aec-q101 qualified typical applications for use in low voltage,high freqency inverters,free wheeling, and polarity protection application vrrm v vrms v vdc v if(av) a ifsm a tj, tstg c if=1a, ta=25 if=2a, ta=25 if=2a, ta=125 ta=25 ta=125 typical junction capacitance 4.0 v, 1 mhz c j pf typical thermal resistance juntion to mount r jm 1) /w note1:thermal resistance from junction to mount,mounted on pcb with 8.08.0mm copper pads maximum ratings (ta = 25 c unless otherwise noted) parameter symbol LS26 unit maximum repetitive peak reverse voltage 60 maximum rms voltage 42 maximum dc blocking voltage 60 maximum average forward rectified current 2.0 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 50 operating junction and storage temperature range - 55 to + 150 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol min typ max unit ma 50 maximum instantaneous forward voltage vf - 0.48 0.60 volts - 0.58 0.70 - 0.53 - maximum dc reverse current at rated dc blocking voltage ir 0.5 110 20 esgb (smaf) www.goodark.com 1/4 2014.03-rev.a
LS26 surface mount schottky rectifier reverse voltage 60v forward current 2a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 2.maximum non - repetitive peak forward surge current figure 3. typical reverse characteristics figure 4. typical junction capacitance figure 5.forward current derating curve figure 1. typical instantaneous forward characteristics www.goodark.com 2/4 2014.03-rev.a
LS26 surface mount schottky rectifier reverse voltage 60v forward current 2a package outline dimensions packing information packing quantities: 10,000 pcs/reel 12mm tape, 13" reel tape & reel specification soldering footprint www.goodark.com 3/4 2014.03-rev.a dim min max min max a 0.92 1.08 0.036 0.043 a1 0 0.1 0.000 0.004 b 1.25 1.45 0.049 0.057 c 0.1 0.25 0.004 0.010 d 2.6 2.8 0.102 0.110 e 4.1 4.3 0.161 0.169 l 0.7 1.1 0.028 0.043 he 4.8 5.2 0.189 0.205 unit: mm unit: inch
LS26 surface mount schottky rectifier reverse voltage 60v forward current 2a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-rev.a
|
